Cleaning The Printer; Cleaning Residue From Printer; Cleaning The Display - Brady BradyPrinter S3000 User Manual

Cleaning the Printer

Cleaning Residue from Printer

Whenever performing any maintenance on the printer, you should also clean any residue caused by
the labels.
Materials Required:
•
•
•
•
1. Remove power and supplies from the printer (see
2. With safety glasses on, spray compressed air on any parts of the printer that have built-up
residue.
Note: If compressed air is not available, use a lint-free cloth lightly moistened with isopropyl alcohol
and wipe off residue.
3. Replace the ribbon and labels.
4. Close all covers and plug in the power cord.

Cleaning the Display

Materials Required
•
•
•
Note: Normal cleaners with ammonia, soaps, or any acids can damage the screen. Use only a
lint-free cloth dampened with isopropyl alcohol.
1. Lightly moisten a lint-free cloth with isopropyl alcohol, or use a pre-moistened cloth suitable for
cleaning a PC screen.
2. Gently rub the damp cloth across the screen until all of the residue is removed.
BradyPrinter S3000
Compressed Air Bottle, purchased locally (e.g., HOSA AIR-464 Gear Duster)
Lint-free Cloth
Isopropyl Alcohol
Safety Glasses
CAUTION! Always wear safety glasses when using compressed air.
Lint-free Cloth, non-abrasive
Isopropyl Alcohol
- or -
Pre-moistened Cloth (appropriate for cleaning LCD displays)
Pre-maintenance Operations" on page
Maintenance
Cleaning the Printer
21).
23