Usb Cradle (Ha-R60Io - Casio IT-G400 Series User Manual

USB Cradle (HA-R60IO)

The USB cradle can be used to connect the IT-G400 to devices such as a computer or USB
device. It can also be used to supply power to the IT-G400 and to charge the battery pack.
Part Names and Operation
<Top>
6
1 USB port
2 Serial port
3 AC adapter jack
Power supply/
4
data communication terminal
5 Battery pack power contacts
Battery pack charging status
6
LED
Installing and Connecting the Power Supply
Use the supplied AC adapter as the power supply for the USB cradle.
1. Plug the AC adapter into the AC adapter jack
on the back of the USB cradle.
2. Plug the AC adapter into a mains power outlet.
3. When connecting to a computer, plug the
micro USB cable provided into the USB port.
When connecting to a USB device, plug the
USB host cable into the USB port.
5
2
4
Used to connect to a computer or USB device.
The cradle features a serial port, but it cannot be used.
Used to connect an AC adapter as a power supply.
Used to supply power to the IT-G400 or for data communication.
Used to charge the battery pack.
Shows the charging status.
Red:
Green:
Flashing alternately red/green: Battery pack fault or outside
<Back>
Charging
Charging complete
charging temperature range
1
3
Computer
E-37