AEG FAVORIT 54000 VI User Manual page 33

• To adjust electronically the level of the water softener. Refer to 'Setting the water soft-
ener'.
• To deactivate/activate the rinse aid dispenser when the multitab function is on. Refer
to 'What to do if...'.
• To cancel the washing programme in progress or a delay start in progress. Refer to
'Select and start a washing programme'.
• To deactivate/activate the audible signals. Refer to 'Audible signals'.
Setting mode
The appliance must be in setting mode for these operations:
• To select and start a washing programme and/or a delay start.
• To adjust electronically the level of the water softener.
• To activate/deactivate the multitab function.
• To activate/deactivate the rinse aid dispenser.
• To deactivate/activate the audible signals.
Press the on/off button. The appliance is in setting mode when:
– All the programme indicator lights come on.
Press the on/off button. The appliance is not in setting mode when:
– Only one programme indicator light comes on.
– It is necessary to cancel the programme or the delay start to go back to the setting
mode. Refer to 'Select and start a washing programme'.
Audible signals
The audible signals indicate:
• The end of the washing programme.
• The electronic adjustment of the level of the water softener
• The appliance has a malfunction.
Do these steps to deactivate the audible signals:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C until the indicator lights of function but-
tons A, B and C start to flash.
4. Release function buttons B and C.
5. Press the function button C.
– The indicator lights for function buttons A and B go off.
– The indicator light for function button C flashes.
– The end-of-programme indicator light comes on.
• The audible signals are active.
6. Press the function button C again.
– The end-of-programme indicator light goes off.
• The audible signals are deactivated.
33
Control panel