Makita 2704 Technical Information page 15

W
iring
Put lead wires (and Noise suppressor and Choke coil if they are used) into place as illustrated below.
220V-240V Specifications Except Europe, Turkey, South Africa, Australia and New Zealand
Pilot hole for
Motor housing
passing lead
wires to inside
Caution on Power supply cord and Relay cord in Base complete
Do not make a slack between Switch box and Strain relief A.
Fix Relay cord with Strain relief B in the prescribed position.
See illustration below.
Base complete
Strain relief A
Cord guard
Motor housing
Relay cord
Strain relief B
This length should be
240mm plus minus 10mm.
Grommet
Relay cord
Relay cord between
Switch box and Motor
Strain relief B
Motor housing
Switch box
P 15 / 15
Switch box
Grommet
Switch
Power
supply
cord