Removing the WMC6300 Wireless Modem Card
The WMC6300 should be ejected using the following procedure to ensure that power to the card
is disabled prior to removal.
1. Click on the Unplug or Eject Hardware icon in the system task bar. Select "Safely
remove Generic Multifunction PC-Card" from the popup menu as shown in
2. Wait for a message that indicates that the device may be safely removed from the
system as shown in
Figure 42.
ATTENTION
Always eject card when not in use.
Figure 41.
Unplug or Eject Hardware Icon
Figure
42.
Safe to Remove Hardware - WMC6300 Card
30
Figure
41.