D-Link DCS-4802E User Manual page 55

Section 3: Configuration
Here you can set the Simple Network Management Protocol (SNMP) settings for the camera, which allow for SNMP management of
the camera. After making any changes, click the Save button to save your changes.
Enable SMNPv1,
Enable this option to allow for SNMPv1 and SNMPv2c management
SNMPv2c:
of the camera.
Read/Write
Enter a name for the read/write community of your SNMP server.
Community:
Read Only
Enter a name for the read-only community of your SNMP server.
Community:
Enable SNMPv3:
Enable this option to allow SNMPv3 management of the camera.
Read/Write
Enter a name for the read/write community of your read/write
Security Name:
SNMP server.
Authentication
Enter the type of authentication used by your read/write SNMP
Type:
server.
Authentication
Enter the authentication password used for your read/write SNMP
Password:
server.
Encryption
Enter the encryption password used for your read/write SNMP
Password:
server.
Read Only
Enter a name for the read-only community of your read-only SNMP
Security Name:
server.
D-Link DCS-4802E User Manual
SNMP
55