Precaution; Specific Service Instructions - Kenwood NX-5300 Service Manual

This service manual does not describe PRECAUTION.
2.1 SYSTEM SET-UP
Merchandise received
Choose the type of transceiver
Transceiver programming
Are you using the optional antenna?
Are you using the speaker microphone?
Are you using the secure cryptographic module?
Delivery

PRECAUTION

SPECIFIC SERVICE INSTRUCTIONS

A personal computer, programming interface (KPG-36U/36X),
and FPU (programming software) are required for programming.
(The frequency, and signaling data are programmed for the transceiver.)
YES
NO
YES
NO
YES
NO
SECTION 1
SECTION 2
Frequency range (MHz) RF power
TX/RX 450~520
TX/RX 380~470
TX/RX 400-470
KRA-23/KRA-27/KRA-42
Optional antenna
(Option)
KMC-41/KMC-42W/ * If the internal GPS function
KMC-54WD
Speaker microphone
(Option)
KWD-AE30/AE31 Refer to the "2.3.1 SECURE CRYPTOGRAPHIC
MODULE (KWD-AE30/KWD-AE31:Option)".
(Option)
Type DTMF keypad
5W NX-5300 F2 No
5W NX-5300 F3 Yes
5W NX-5300 K2 No
5W NX-5300 K3 Yes
5W NX-5300 F5 No
5W
NX-5300 F6 Yes
5W NX-5300 K5 No
Yes
5W NX-5300 K6
5W NX-5300 E Yes
No
5W NX-5300 E2
is not used, the KMC-47GPSD
can be used as GPS
speaker microphone.
(No.RA015<Rev.002>)1-5