Precaution; Specific Service Instructions - Kenwood NX-5300 F2 Service Manual

This service manual does not describe PRECAUTION.
2.1 SYSTEM SET-UP
Merchandise received
Choose the type of transceiver
Transceiver programming
Are you using the optional antenna?
Are you using the speaker microphone?
Are you using the secure cryptographic module?
Delivery
1-4 (No.RA015<Rev.001>)

PRECAUTION

SPECIFIC SERVICE INSTRUCTIONS

A personal computer, programming interface (KPG-36U),
and FPU (programming software) are required for programming.
(The frequency, and signaling data are programmed for the transceiver.)
YES
NO
YES
NO
YES
NO
SECTION 1
SECTION 2
Frequency range (MHz) RF power
TX/RX 450~520
TX/RX 380~470
KRA-23/KRA-27/KRA-42
Optional antenna
(Option)
KMC-41/KMC-42W/ * If the internal GPS function
KMC-54WD
Speaker microphone
(Option)
KWD-AE30/AE31 Refer to the "2.3.1 SECURE CRYPTOGRAPHIC
MODULE (KWD-AE30/KWD-AE31:Option)".
(Option)
Type DTMF keypad
5W NX-5300 F2 No
5W NX-5300 F3 Yes
5W NX-5300 K2 No
5W NX-5300 K3 Yes
5W NX-5300 F5 No
5W
NX-5300 F6 Yes
5W NX-5300 K5 No
Yes
5W NX-5300 K6
is not used, the KMC-47GPSD
can be used as GPS
speaker microphone.