Configuring TCP/IP in Windows 2000
Open the Control Panel (click Start, select
1
Double-click the Network and Dial-up Connections icon.
2
Double-click Local Area Connection
3
system.
Click Properties.
4
If Internet Protocol (TCP/IP) is in the list of components, TCP/IP is installed. You can skip to
step 8.
If Internet Protocol (TCP/IP) is not in the list, click Install.
Click Protocol on the Select Network Component Type window and click Add.
5
Click Internet Protocol (TCP/IP) in the Network Protocol section on the Select Network
6
Protocol window.
Click OK.
7
Select Internet Protocol (TCP/IP) in the Local Area Connection
8
window.
Click Properties to view the Internet Protocol (TCP/IP) Properties window.
9
Select Obtain IP address automatically and Obtain DNS server address
10
automatically. Click OK to accept the TCP/IP settings, and close the window.
You will need to restart your computer to change the settings.
After completing the TCP/IP configuration, go to
OS"
on page 14.
Settings
. The value of
number
12 —
SBV5422 SURFboard Digital Voice Modem
and then Control Panel).
varies from system to
number
number
"Verifying the IP Address in Your Windows
Properties