Fp2 Multi-Wire Link Unit - Panasonic MEWNET-F Technical Manual

2.1 FP2 Multi-wire Link Unit

FP2 Multi-wire Link Unit (AFP2720)
Part Names and Functions
(1)Operation monitor LEDs
Indicates communication status and operation mode, such as run/stop, error/alarm..
(2)Station number selector
Sets the unit No. of the master unit in the network. (It is used in the W/W2 mode only.)
In the W mode, the setting will be effective as soon as a unit number is changed.In the W2 mode, unit
numbers should be changed when the power supply is off.The setting will be effective next time the
power turns on.
(3)Station number selector
Switches the display range of the station number LEDs. (It is used in the F mode only.)
(4)Mode selector switches (1)
Sets the operation mode (PC link mode, non-PC link mode, terminal station).
The setting of the mode selector switches should be changed when the power supply is off.The setting
will be effective next time the power turns on. (The setting for the terminal station will be effective as
soon as a unit number is changed.)
2-2