RIDGID 1224 Manual
  1. Manuals
  2. Brands
  3. RIDGID Manuals
  4. Industrial Equipment
  5. 1224
  6. Manual

RIDGID 1224 Manual

Threading machine
Hide thumbs Also See for 1224:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual , Manual
Threading Machine
Manual
1224 Threading Machine
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

Advertisement

Table of Contents
loading

Related Manuals for RIDGID 1224

Summary of Contents for RIDGID 1224

  • Page 1 Threading Machine Manual 1224 Threading Machine 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com...

  • Page 2: Safety Symbols

    1224 Threading Machine Safety Symbols In this operator’s manual and on the product, safety symbols and signal words are used to communicate important safe- ty information. This section is provided to improve understanding of these signal words and symbols. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3 1224 Threading Machine plugs with earthed (grounded) power tools. Unmodi - • Dress properly. Do not wear loose clothing or jew- fied plugs and matching outlets will reduce risk of elec- elry. Keep your hair and clothing away from mov- tric shock.

  • Page 4: Specific Safety Information

    Machine can be used to thread larger pipe, short or close • Keep hands away from rotating pipe and fittings. nipples or for roll grooving. The 1224 machine can also be Stop the machine before wiping pipe threads or used to cut standard grooves on pipes and to cut or strip screwing on fittings.

  • Page 5: Standard Equipment

    12RPM/36RPM Carriage Standard equipment Carriage Warning Handwheel Refer to the RIDGID catalog for details on equipment Label supplied with specific machine catalog numbers. The Threading Machine serial number plate is located on No. 200 Stand Warning the end of the base. The last 4 digits indicate the month Label and year of the manufacture.

  • Page 6: Machine And Work Area Set-Up

    Dull or damaged cutting tools increase unplugged before assembly. required force, produce poor results and increase use proper lifting techniques. The RIdGId 1224 the risk of injury. Threading Machine weighs 509 lbs. (231 kg). • Any other condition which may prevent safe and normal operation.
  • Page 7 The 1224 Threading Machine can be used with a variety create a minimum of 3' (1 m) clearance around the of RIDGID Die Heads to cut pipe and bolt threads. See the threading machine and pipe. This helps prevent non- RIDGID catalog for available die heads.
  • Page 8 1224 Threading Machine place. When it is installed, the Die Head can be pivoted on on the dies must correspond with those on the die post to align it with pipe or it can be swung up and out of head slots.
  • Page 9 1224 Threading Machine “Remove Dies” Mark 8. Make sure roll pin points to ward REMOVE DIES Roll Pin Size Bar mark. 9. Tighten the clamp lever. Index Trigger Line Assembly Adjusting Thread Size Lock 1 Install the die head per the Thread ing Machine Instruc -...
  • Page 10 Always change dies as sets – do not mix dies from different sets. The Model 714 (NPT/NPSM) and 914 (BSPT/BSPP) receding self-opening die heads are used on 1224 thread- 6. Rotate cam to size setting desired. ing machine for 2 "...
  • Page 11 1224 Threading Machine Figure 15 – Adjusting for Tapered or Straight Pipe Threads Adjusting for Tapered or Straight Pipe Threads Preparing the Die Head to Thread Lower the die head down into the threading position. 1. For tapered threads (NPT or BSPT depending on die head), referencing Figure 15, adjustments are “IN”.
  • Page 12 1224 Threading Machine 2. Insert pipe shorter than 2' (0,6 m) from the front of the Opening the Die Head at the End of the Thread machine. Insert longer pipes through either end so • Tapered threads: at the end of the thread the spherical...
  • Page 13 Figure 20 – Carriage Handwheel Adjustment Changing operating Speeds The 1224 has two operating speeds – 12 and 36 rpm. 36 Cutting with No. 764 Cutter rpm can be used for cutting and reaming pipe up to 4"...
  • Page 14 1224 Threading Machine 2. Tighten the cutter feed screw handle to bring the cutter wheel firmly in contact with the pipe while keeping the cutter wheel aligned with the mark on the pipe. 3. Move the REV/OFF/FOR switch to the FOR position.
  • Page 15 1224 Threading Machine Left Hand Threading Cutting left hand threads is similar to the right hand thread - ing process. To cut left hand threads, left hand die heads and dies are required. Latch the die head in place (Figure 24).

  • Page 16: Maintenance Instructions

    1224 Threading Machine Inspecting Threads 2. Clean the chips and other debris from the chip tray. Remove or secure all equipment and material from 1. After removing the pipe from the machine, clean the the machine and stand prior to moving to prevent thread.
  • Page 17 1224 Threading Machine quence. Do not operate the threading machine with cover off. Drain Plug Figure 29 – Removing the Draw Tray Assembly Figure 27 – Top Cover Screw Tightening/Loosening Sequence Keep oil filter screen clean for sufficient oil flow. Oil filter screen is located in the bottom of oil reservoir.
  • Page 18 Clean towards the pulley. Remove and replace belt. Slide build up from the bottom of the reservoir. Use RIDGID motor away from pulley and secure fasteners that Thread Cutting Oil for high quality threads and maxi- hold motor to bracket.

  • Page 19: Machine Storage

    For a complete listing of RIdGId equipment avail- specialize in recycling that may be found locally. Dispose able for the 1224 Threading Machine, see the Ridge of the components and any waste oil in compliance with Tool Catalog online at RIdGId.com or call Ridge all applicable regulations.

  • Page 20: Troubleshooting

    1224 Threading Machine Troubleshooting PRoBLeM PoSSIBLe ReASoNS SoLuTIoN Torn threads. Damaged, chipped or worn out dies. Replace dies. Incorrect cutting oil. Only use RIDGID ® Thread Cutting Oil. Insufficient cutting oil. Fill oil reservoir. Dirty or contaminated oil. Replace the RIDGID ®...
  • Page 21 Visit us at www.TestEquipmentDepot.com ©2005, 2018, RIDGID, Inc. Printed 3/18 The Emerson logo and RIDGID logo are registered trademarks of Emerson Electric Co. or RIDGID, Inc. in the U.S. and other countries. 940-713-030.10 EC43302 All other trademarks belong to their respective holders.

Table of Contents