Adjust Your Microphone Volume (Usb Only) - Cisco 521 User Manual

Adjust Your Microphone Volume (USB Only)

Step 4
Select Speaker > Sidetone.
Step 5 Press the Navigation cluster, up or down, to adjust the sidetone.
Step 6
Press Save to apply your setting.
Adjust Your Microphone Volume (USB Only)
You can adjust how loud you sound through your headset microphone when you use a USB connection. You
may wish to adjust this setting depending your surrounding ambient noise level.
Procedure
Step 1
Press Applications
Step 2 Select Status > Accessories.
Step 3
Highlight Cisco Headset and press Setup.
Step 4 Select Microphone > Gain.
Step 5
Press the Navigation cluster, left or right, to adjust the gain.
Step 6 Press Save to apply your setting.
Test Your Microphone (USB Only)
You can test your microphone to hear how you sound through your headset when you use a USB connection.
Procedure
Step 1
Press Applications
Step 2 Select Status > Accessories.
Step 3
Highlight Cisco Headset and press Setup.
Step 4 Select Microphone > Test.
Step 5
Press Record and speak into the microphone.
Step 6 Press Play when you finish speaking and listen to the test recording. The maximum recording time is 20
seconds.
Webex DX Headset Customization
Change Audio Sources on Your Webex DX
Your DX device can connect to multiple audio devices.
Cisco Headset 500 Series User Guide
24
.
.
Headset Settings