Connector Panel; Mono Input Connectors - Sony MXP-310 Manual

2-4 Connector Panel

2-4-1 Mono Input Connectors

The input signal fed to the mono input module is
switched between the UBL IN, LINE IN, and MIC IN
connectors by the INPUT SELECT switch on the
mono input module front panel.
For the details of the INPUT SELECT switch, see page 2-5.
1 UBL IN (unbalanced line input) connectors
1 to 6 (phono jack)
Used to input the line output signal from a VTR or
amplifier.
2 LINE IN (balanced line input) connector
1 to 6 (XLR-3-31 type)
Used to input the line output signal from a VTR or
amplifier.
3 MIC IN (microphone input) connectors
1 to 6 (XLR-3-31 type)
Connect a microphone.
When you set the control panel INPUT SELECT
switch to the MIC +48V position, power is supplied to
the phantom-powered condenser microphone.
6 5 4
UBL IN UBL IN UBL IN UBL IN
LINE IN
MIC IN
3 2 1
UBL IN UBL IN
Pin assignment of XLR-3-31 and XLR-3-32 connectors
Pin number
No.1
No.2
No.3
Chapter 2 Locations and Functions of Parts and Controls
1 UBL IN connectors
2 LINE IN connectors
3 MIC IN connectors
Signal name
Ground
Hot
Cold
2-21