Returns Section - Sony MXP-310 Manual

2-3 Output and Monitor Signal Section

2-3-2 RETURNS Section

1 Output bus switch for RETURNS 1-2 [1-2]
Press to route the RETURNS 1 and 2 signals to the
line outputs 1 and 2.
2 BAL (balance) control for RETURNS 1-2
Turn to adjust the relative level of RETURN 1 and
RETURN 2 signals.
If you turn the Then, the balance of the
BAL control: RETURN 1 and 2 will be:
Fully towards "L" RETURN 2 signal is fully
attenuated. RETURN 1 signal
passes to the LINE OUTPUT 1.
Fully towards "R" RETURN 1 signal is fully
attenuated. RETURN 2 signal
passes to the LINE OUTPUT 2.
3 LVL (level) control for RETURNS 1-2
Turn to control the level of the RETURN 1 and
RETURN 2 signals. Turn the control fully clockwise
for the unity gain.
2-14
Chapter 2 Locations and Functions of Parts and Controls
1-2 1 Output bus switch for RETURNS 1-2 [1-2]
RETURNS
1-2
0
2 BAL control for RETURNS 1-2
BAL
L R
3 LVL control for RETURNS 1-2
LVL
0 10
4 Output bus switch for RETURNS 3-4 [1-2]
1-2
RETURNS
0
3-4
5 BAL control for RETURNS 3-4
BAL
L R
6 LVL control for RETURNS 3-4
LVL
0
10
RETURNS
4 Output bus switch for RETURNS 3-4 [1-2]
Press to route the RETURNS 3 and 4 signals to the
line outputs 1 and 2.
5 BAL (balance) control for RETURNS 3-4
Turn to adjust the relative level of RETURN 3 and
RETURN 4 signals.
If you turn the
BAL control:
Fully towards "L"
Fully towards "R"
6 LVL (level) control for RETURNS 3-4
Turn to control the level of the RETURN 3 and
RETURN 4 signals. Turn the control fully clockwise
for the unity gain.
Then, the balance of the
RETURN 3 and 4 will be:
RETURN 4 signal is fully
attenuated. RETURN 3 signal
passes to the LINE OUTPUT 1.
RETURN 3 signal is fully
attenuated. RETURN 4 signal
passes to the LINE OUTPUT 2.