Table of Contents
Advertisement
Parallel Interface Connection
Connect the printer to the parallel port of the host computer using a parallel cable.
Notes
• The parallel data cable connectors should be inserted firmly, as far as they will
• The parallel data cable should be no longer than 3 meters, and should conform to
Ethernet Connection
To connect to Ethernet, set the IP address before connecting the cable. Ask your
network administrator for an IP address.
1
2
3
4
5
go.
the Centronics printer cable specification. The correct type of parallel cable to
use depends on the computer and whether other peripheral devices are connected
to the parallel port. Refer to the machines' manuals for details.
Connect the power cord.
Turn the printer power on.
Press and hold the POWER switch for about 3 seconds.
Press the
button.
Select "I/F SETTING" with the
Select "NETWORK SETTING" with the
/
buttons.
/
buttons.
17
Preparation
Advertisement
Table of Contents
