Table of Contents
Advertisement
Simple Network Management Protocol (SNMP)
(2.5.1.3) proV1MSBlinkMngRtpTxIp
RTP Tx IP address
0.0.0.0 - 255.255.255.255
For Multicast transmission, select in the range
224.0.0.0 to 239.255.255.255.
(2.5.1.4) proV1MSBlinkMngRtpTxPort
RTP Tx Port
50000 - 65534 (even number)
(2.5.1.5) proV1MSBlinkMngRtpTxFecmode
RTP Tx FEC mode
0: None
1: OFF
2: ON
(2.5.1.6) proV1MSBlinkMngRtpTxFormat
RTP Tx Format
0: None
1: Format 1 (1 TS packet per IP datagram)
2: Format 2 (6 TS packets per IP datagram)
(2.5.1.7) proV1MSBlinkMngRtpTxSsrc
RTP Tx SSRC number
0x0 - 0xFFFFFFFF (HEX)
The "0x" prefix must appear at the beginning of the
setting value: e.g. 0xfe.
(2.5.1.8) proV1MSBlinkMngRtpTxCname
RTP Tx Cname
MAX 15 characters
(2.5.1.9) proV1MSBlinkMngRtpRx
RTP Rx
0: None
1: OFF
2: ON
(2.5.1.10) proV1MSBlinkMngRtpRxIp
RTP Rx IP address
0.0.0.0 - 255.255.255.255
If set to 255.255.255.255, the data will be received
regardless of the MPEG stream input source IP
address. However, to receive multicasts, set in the
range 224.0.0.0 to 239.255.255.255.
(2.5.1.11) proV1MSBlinkMngRtpRxPort
RTP Rx Port
50000 - 65534 (even number)
(2.5.1.12) proV1MSBlinkMngBufferDepth
RTP Buffer Depth
0 - 2000
(2.5.1.13) proV1MSBlinkMngTosFieldx
RTP TOS Field
0x0-0xFF(HEX)
The "0x" prefix must appear at the beginning of the
setting value: e.g. 0xfe.
99
Advertisement
Table of Contents
