Sony MSB-2000 Operation Manual page 85

List of Menus
U:log menu
This menu makes log-related settings.
Item number Category
U001 log
U002 log
U003 log
U004 log
U005 log
U006 log
– log
– log
– log
– log
– log
– log
– log
– log
– log
– log
Supplementary information
The parameters of the "setup" class require the "proc
start" to be executed before they can be reflected in
real operation. Until the "proc start" is executed, the
return messages for them represent the values changed
with commands of the "setup" class.
• When there are parameters whose settings differ from
the values used in real operation, an "*" is postfixed
to the return message.
• When the value of a parameter being set or read
differs from its value used in real operation, an "**"
is postfixed to the return message.
Item Arguments
serial off
on
telnet off
on
dump_all –
dump_resume –
dump_sub –
clear –
filter_critical off
on
filter_major off
on
filter_minor off
on
filter_warning off
on
filter_clear off
on
filter_command off
on
filter_status off
on
alarm_counts –
alarm_list critical
major
minor
warning
level_change off
on
code_load
code_list
Function
Invalidates displaying logs on the serial on terminal.
Validates displaying logs on the serial terminal.
Invalidates displaying logs on the telnet terminal.
Validates displaying logs on the telnet terminal.
Makes a log file for 5000 logs. This log is updated cyclically.
The File name is "logfile". (Volatile)
Makes a log file for 1000 logs. This log is updated
cyclically. The File name is "logfile". (Non volatile)
Makes a log file for 1000 logs. This shows logs form
power on. The File name is "logfile". (Volatile)
Clears all logs.
Do not filter the Critical Error Log for telnet/serial output.
Filter the Critical Error Log for telnet/serial output.
Do not filter the Major Error Log for telnet/serial output.
Filter the Major Error Log for telnet/serial output.
Do not filter the Minor Error Log for telnet/serial output.
Filter the Minor Error Log for telnet/serial output.
Do not filter the Warning Log for telnet/serial output.
Filter the Warning Log for telnet/serial output.
Do not filter the Clear Error Log for telnet/serial output.
Filter the Clear Error Log for telnet/serial output.
Do not filter the Command Log for telnet/serial output.
Filter the Command Log for telnet/serial output.
Do not filter the Status Log for telnet/serial output.
Filter the Status Log for telnet/serial output.
For each of transmitting and receiving, output the number of
errors and warnings that have not yet been cleared (as
three-digit decimal values).
Output the uncleared errors and warnings whose numbers
are shown by log alarm_counts, according to the
parameters, in device number order.
If the arguments are omitted, output all types in the
sequence critical, ... , warning.
Do not change the log level.
Change the log level.
Record the codefile for changing the log level on this device.
Output the codefile recorded on this device.
85