Mitsubishi MELSEC-Q Series User Manual page 333

9
UTILITY OPERATION
Module information Other station monitor
Item
Target module
Start I/O No.
Self station information
Test item
button
Start
Table9.53 Explanation of Test screen
Online operation Parameter setting
Select the module to be tested.
(Initial value: "1 Slot", Setting range: "1 Slot" to "8 Slot")
Displays the start I/O No. of the CC-Link module.
Displays the station No., station type ("Master station" or "Local station") and operating
mode of the CC-Link module selected in "Target module".(
Select the test to be executed.
Display
Tests whether the connected station is in a data link
Line test enabled status or not. (Can be selected only for the master
station)
Network test Tests a data link start and stop.
Performs the test selected in the above "Test item".
Line test ........... This section (2)(a)
Network test ..... This section (2)(b)
Test
Target setting
Description
Section 9.3.2 (1)(a))
Description
9.3 CC-Link utility
9.3.7 Operating Test screen
9
10
11
12
13
14
15
16
9
- 83