Specifications - Makita AC310H Instruction Manual

ENGLISH
Explanation of general view
1. Air Tank pressure gauge
2. Regulated presusre gauge "HP"
3. Air regulator "HP"
4. Quick couplers "HP" (Air outlet)
5. Regulated Pressure gauge "RP"
6. Air regulator "RP"
7. Quick coupler "RP" (Air outlet)
8. Drain valve
9. Pressure Switch

SPECIFICATIONS

MAX Output Power
SCFM @ 40 PSIG
SCFM @ 90 PSIG
SCFM @ 300 PSIG
Cut-In Pressure
Cut-Out Pressure
Bore x Stroke x Qty
Voltage -Single Phase
Dimensions (L x H x W)
Outlet Max Pressure "HP"
(Exclusively for High Pressure Pneumatic Use)
Outlet Max Pressure "RP"
(Exclusively for Regular Pressure Pneumatic Use)
CSA/US Listed
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Minimum Circuit Requirement: 15 AMPS
* A circuit breaker is preferred. Use only a fuse or circuit breaker that is the same rating as the branch circuit the air
compressor is operated on. If the air compressor is connected to a circuit protected by fuses, use time delay fuses.
IMPORTANT
Read the Safety Guidelines and ALL instructions carefully before operating.
www.makitatools.com
www.makita.ca
2
Model
Hz
Motor RPM
Lubrication
Tank Size
Weight
9
7
6
3
330 PSIG (2.3 MPa)
400 PSIG (2.8 MPa)
62 mm x 31 mm x 1, 145 mm x 10 mm x 1
1.6 gal (6.2 L)
36 kg (79.4 lb)
18-3/4" x 14-3/4" x 20" (476 x 375 x 507 mm)
375 PSIG (2.6 MPa)
130 PSIG (0.9 MPa)
5
1
2
8
AC310H
1500 W
3.7
3.6
2.7
120 V AC
60 Hz
-1
1700 min
Oil-Less
Yes
4