Usb Cable Connection - Yamaha Sonogenic SHS-500 Owner's Manual

USB Cable Connection

TO HOST
1.
Turn off the power of the instrument, then connect your smart device to the
instrument.
For the proper order, carefully follow the indicated instruction steps as illustrated above.
The necessary items for this connection differ depending on your smart device as illustrated
above. They are separately sold items.
NOTICE
Use an AB type USB cable of less than 3 meters. USB 3.0 cables cannot be used.
2.
Turn on the instrument.
3.
Change the setting of the instrument from Bluetooth to [TO HOST] terminal.
Press the [FUNCTION] button repeatedly to call up the Function menu "MIDI Select" in the upper
of the display, then rotate the [SELECT] knob to select the value "USB MIDI" in the bottom of the
display. If you want to connect to the "Chord Tracker" app with Bluetooth, restore the value to
"BLE MIDI."
28
SHS-500 Owner's Manual
USB cable
1
USB (B)
Lightning to USB
Camera Adapter
2
USB (A)
USB conversion adaptor
2
If the device's connector is USB Micro B:
Use a USB Type A female - USB Micro B male
conversion adaptor
If the device's connector is USB Type C:
Use a USB Type A female - USB Type C male
conversion adaptor
iOS device
3
Android
device
3