Midi Data Reception With Usb To Device - Yamaha MODX6 Supplementary Manual

MIDI Data Reception with USB TO DEVICE

This function now enables this instrument to receive MIDI data from an external MIDI keyboard / controller connected to the
[USB TO DEVICE].
Supported MIDI equipment: MIDI devices that are USB MIDI class compliant and devices tested by Yamaha
* For a list of devices tested by Yamaha, refer to the link below
https://www.yamaha.com/2/modx
NOTE The maximum rated value of the [USB TO DEVICE] is 5V/500mA. Do not connect to USB devices that exceed the rated value, since
such devices may cause damage to the instrument.
This function does not support MIDI data transmission to a connected device via the [USB TO DEVICE] on this instrument.
NOTE
 When MIDI I/O Mode is set to Multi
• Channel events, received through channels corresponding to Parts with Keyboard Control Switch set to On, are received in
parallel by all Parts with Keyboard Control Switch set to On. After receiving, when this instrument transmits MIDI data, all note
data of the channel corresponding to parts with Keyboard Control Switch set to On are transmitted.
• Channel events received via the channel that corresponds to the Part with Keyboard Control Switch set to Off affect the
corresponding Part. After receiving, when this instrument transmits MIDI data, the same channels used for receiving are used
to transmit the channel data.
 When the MIDI I/O Mode is set to Single or Hybrid
• Channel events, received through channels corresponding to Parts with Keyboard Control Switch set to On, are received in
parallel by all Parts with Keyboard Control Switch set to On. However, when this instrument receives Control Change
messages regarded as Common parameters and the MIDI I/O mode is set to Single, this instrument does not send Control
Change messages to the Part and instead treats them as Common parameters. After receiving, Sending of Control Change
messages is done according to the MIDI I/O Channel setting.
• Channel events received via the channel that corresponds to the Part with Keyboard Control Switch set to Off are received by
the corresponding Parts. The received MIDI data is not re-transmitted when the MIDI I/O mode is set to Single.
MODX Supplementary Manual
38