Power Status; Setting The Auto Power Off Function; Disabling Auto Power Off; Enabling Auto Power Off - Yamaha Sonogenic SHS-500 Owner's Manual

Power status

You can confirm the power source at the right corner of the display.
AC adaptor

Setting the Auto Power Off function

To prevent unnecessary power consumption, this instrument features an Auto Power Off function that
automatically turns the power off if the instrument is not operated for a specified period of time. The
amount of time that elapses before the power is automatically turned off is 30 minutes by default;
however, you can change the setting via Function (For details, refer to the Reference Manual).

Disabling Auto Power Off

1.
When the instrument is turned on, turn off the power.
2.
Turn the power on while holding down the lowest key on the keyboard.
A message "AutoOff Disabled" appears briefly.

Enabling Auto Power Off

To enable the Auto Power Off function, change the setting via the Function mode or initialize the
instrument (page 32).
NOTICE
• Some of the data of this instrument (page 32) are retained when the power is turned off.
• If your instrument is connected to other equipment such as amplifiers and speakers but you do not intend
to use it for 30 minutes, we recommend that you turn off all devices as described in their owner's manuals.
Doing so eliminates the risk of damage to the other equipment. If you do not want the instrument to turn off
automatically when connected to other equipment, disable the Auto Power Off function.
20
SHS-500 Owner's Manual
Batteries: full Batteries: half
Replace soon.
Batteries: low
Power will turn off.