Table of Contents
Advertisement
The shape of pan supports and the
amount of burners can be different in
other models of the appliance.
8.4 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, sugar and food with sugar,
otherwise, the dirt can cause damage
to the hob. Take care to avoid burns.
• Remove when the hob is sufficiently
cool: limescale rings, water rings, fat
stains, shiny metallic discoloration.
Clean the hob with a moist cloth and
9. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
9.1 What to do if...
Problem
You cannot activate or oper-
ate the hob.
a non-abrasive detergent. After
cleaning, wipe the hob dry with a soft
cloth.
• To clean the enamelled parts, caps
and crowns, wash them with warm
soapy water and dry them carefully
before you put them back on.
8.5 Cleaning the ignition
candle and the flame safety
device
Keep the metal part of the ignition
candle and the flame safety device
cleaned with a moist cloth or sponge to
prevent difficult lightning or difficult
flame recognition. Check if the burner
crown is not blocked with food residues.
8.6 Periodic maintenance
Speak to your local Authorised Service
Centre periodically to check the
conditions of the gas supply pipe and
the pressure adjuster, if fitted.
Possible cause
The hob is not connected to
an electrical supply or it is
connected incorrectly.
The fuse is blown.
You do not set the heat set-
ting for 20 seconds.
You touched 2 or more sen-
sor fields at the same time.
ENGLISH
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connec-
tion diagram.
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
Activate the hob again and
set the heat setting in less
than 20 seconds.
Touch only one sensor field.
23
Advertisement
Table of Contents
