Configuring VTP Pruning
Command or Action
Step 15
switch# show vtp devices [conflict]
Example:
Device# show vtp devices
Gathering information from the domain,
please wait.
VTP Database Conf switch ID
Server Revision
------------ ---- --------------
-------------- ----------
----------------------
VLAN
000c.0412.6300 12354
MST
0004.AB45.6000 24
VLAN
000c.0412.6300=000c.0412.6300 67
qwerty.cisco.com
Step 16
switch# copy running-config startup-config
This example shows how to configure VTP in transparent mode for the device:
switch# configure terminal
switch(config)# feature vtp
switch(config)# vtp domain accounting
switch(config)# vtp version 2
switch(config)# vtp mode transparent
switch(config)# exit
switch#
Configuring VTP Pruning
You can configure VTP pruning on the Cisco NX-OS devices.
Before You Begin
You must enable VTP on the device.
Cisco Nexus 7000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.x
50
Primary
System Name
lict
Yes
00b0.8e50.d000
main.cisco.com
No
00b0.8e50.d000
main.cisco.com
Yes
Purpose
(Optional)
This is a VTP version 3 command that displays information about
neighbor switches. The information is not learned from the
summary packet used for regular VTP packets. This command
sends out a separate packet to collect information regarding
neighbor switches running VTP version 3.
(Optional)
Copies the running configuration to the startup configuration.
Configuring VTP