Specifying The Mst Name - Cisco Nexus 7000 Series Configuration Manual

Specifying the MST Name

Command or Action
Option
exit
abort
Example:
switch(config-mst)# exit
switch(config)#
Step 4 copy running-config startup-config
Example:
switch(config)# copy running-config startup-config
This example shows how to enter MST configuration submode on the device:
switch# spanning-tree mst configuration
switch(config-mst)#
Specifying the MST Name
You can configure a region name on the bridge. If two or more bridges are in the same MST region, they must
have the identical MST name, VLAN-to-instance mapping, and MST revision number.
Before You Begin
Ensure that you are in the correct VDC (or enter the switchto vdc command).
SUMMARY STEPS
1. config t
2. spanning-tree mst configuration
3. name name
4. Enter one of the following commands:
5. (Optional) show spanning-tree mst
6. (Optional) copy running-config startup-config
Cisco Nexus 7000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.x
146
Description
Commits all the changes and exits MST configuration submode.
Exits the MST configuration submode without committing any
of the changes.
Configuring MST Using Cisco NX-OS
Purpose
(Optional)
Copies the running
configuration to the startup
configuration.