Chapter 7
ASA FirePOWER Module
Shut Down the Module
Shutting down the module software prepares the module to be safely powered off without losing
configuration data.
Before You Begin
•
•
Procedure
Step 1
Enter one of the following commands:
•
•
Uninstall a Software Module Image
You can uninstall a software module image and its associated configuration.
Before You Begin
In multiple context mode, perform this procedure in the system execution space.
Procedure
Uninstall the software module image and associated configuration:
Step 1
sw-module module sfr uninstall
Module sfr will be uninstalled. This will completely remove the disk image
associated with the sw-module including any configuration that existed within it.
Uninstall module sfr? [confirm]
Reload the ASA:
Step 2
reload
You must reload the ASA before you can install a new module.
sw-module module sfr {reload | reset}
In multiple context mode, perform this procedure in the system execution space.
If you reload the ASA, the module is not automatically shut down, so we recommend shutting down
the module before reloading the ASA.
Hardware module (ASA 5585-X):
hw-module module 1 shutdown
Software module (all other models):
sw-module module sfr shutdown
Managing the ASA FirePOWER Module
Cisco ASA Series Firewall CLI Configuration Guide
7-19