How to Configure ANCP on Cisco ASR 9000 Series Routers
Command or Action
Step 4
show ancp an-port {circuit-id
Access-Loop-Circuit-ID | interface type
interface-path-id | interface Bundle-Ether
bundle-id | mapping} [statistics | detail]
Example:
RP/0/RSP0/CPU0:router# show ancp an-port
gigabitethernet 2/0/1/1.1
Step 5
show ancp an-port [configured |
dynamic-only][statistics]
Example:
RP/0/RSP0/CPU0:router# show ancp an-port
configured
Step 6
show ancp an-port summary
[statistics][detail]
Example:
RP/0/RSP0/CPU0:router# show ancp an-port
summary
Step 7
clear ancp an-port {all | circuit-id
Access-Loop-Circuit-Id | interface type
interface-path-id | interface Bundle-Ether
bundle-id | neighbor {description string |
sender-name { H.H.H | A.B.C.D }}[statistics]
Example:
RP/0/RSP0/CPU0:router# clear ancp an-port
all
Step 8
show ancp an-port {description
description-string | sender-name { H.H.H |
A.B.C.D }}
Example:
RP/0/RSP0/CPU0:router# show ancp an-port
description vendor3b
Step 9
show ancp an-port state [up | down | none]
[statistics]
Example:
RP/0/RSP0/CPU0:router# show ancp an-port
state up
Configuring ANCP Rate Adjustment
Use the ancp rate-adjustment command to apply a mathematical correction to the ANCP rate update
prior to applying it as a shaper rate.
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide
QC-102
Configuring Access Node Control Protocol on Cisco ASR 9000 Series Routers
Purpose
(Optional) Displays information about the
association of DSLAM access ports (or CPE
clients of a DSLAM) with VLAN subinterfaces.
(Optional) Displays summary data or statistics for
AN ports that are or are not mapped to interfaces.
(Optional) Displays port counts by state.
(Optional) Clears AN ports of dynamic data or
statistics either individually or in groups.
Published information is cleared and information
learned from the DSLAM is cleared.
(Optional) Displays AN port information.
(Optional) Displays AN port state information.
OL-23108-02