Mapping An Ports To Vlan Subinterfaces; Summary Steps - Cisco ASR 9000 Series Configuration Manual

How to Configure ANCP on Cisco ASR 9000 Series Routers
Command or Action
Step 9
show ancp neighbor [all] [statistics]
Example:
RP/0/RSP0/CPU0:router# show ancp neighbor
statistics
Step 10
show ancp neighbor state [none | synsent |
synrcvd | estab} [statistics]
Example:
RP/0/RSP0/CPU0:router# show ancp neighbor
none

Mapping AN Ports to VLAN Subinterfaces

Port mapping associates DSLAM access ports or customer premises equipment (CPE) clients of a
DSLAM with VLAN subinterfaces. The VLANs can be IEEE 802.1Q or QinQ hierarchical VLANs. To
map AN ports to VLAN subinterfaces, use the ancp an-port command in global configuration mode.

SUMMARY STEPS

1.
2.
3.
4.
5.
6.
7.
8.
9.
Cisco ASR 9000 Series Aggregation Services Routers Modular Quality of Service Configuration Guide
QC-88
D r a f t — C i s c o C o n f i d e n t i a l
configure
ancp an-port circuit-id Access-Loop-Circuit-Id interface type instance
end
or
commit
show ancp an-port {circuit-id Access-Loop-Circuit-Id | interface type instance | mapping}
[statistics | detail]
show ancp an-port [configured | dynamic-only] [statistics]
show ancp an-port summary [statistics]
clear ancp an-port {all | circuit-id Access-Loop-Circuit-Id | interface type instance | neighbor
{description string | sender-name {H.H.H | A.B.C.D}} [statistics]
show ancp an-port {description description-string | sender-name {H.H.H | A.B.C.D}}
show ancp an-port state [up | down | none] [statistics]
Configuring Access Node Control Protocol on Cisco ASR 9000 Series Routers
Purpose
(Optional) Displays ANCP neighbor information.
(Optional) Displays adjacency protocol state
information.
OL-17239-01