Electrical Requirements; Motor Horsepower - KitchenAid KSB60 series Manual

Table of Contents

Advertisement

Available languages

Available languages

BLENDER SAFETY
9. Keep hands and utensils out of container while blending to reduce the risk
of severe injury to persons or damage to the Blender. A spatula or scraper
other than the provided tamper may be used, but must be used only when
the Blender is not running.
10. Blades are sharp. Handle carefully.
11. The use of attachments, including canning blender jars, not recommended
by KitchenAid may cause a risk of injury to persons.
12. Do not use appliance for other than intended use.
13. Always operate Blender with cover in place.
14. When blending hot liquids or ingredients, ingredient-measuring cap should
remain in place over the lid opening. Always start on lowest speed and
slowly ramp to desired speed when blending hot liquids or ingredients.
SAVE THESE INSTRUCTIONS
This product is designed for household use only.

ELECTRICAL REQUIREMENTS

MOTOR HORSEPOWER

Motor horsepower for the Blender motor was measured using a dynamometer, a machine
that laboratories routinely use to measure the mechanical power of motors. Our 3.0 peak
horsepower (HP) motor reference reflects the horsepower output of the motor itself and
not the Blender's horsepower output in the Blender pitcher. As with any blender, the
power output in the pitcher is not the same as the horsepower of the motor itself. This
motor delivers 2.40 peak HP in the pitcher enabling your Blender to deliver robust power
for all your recipes.
4 | BLENDER SAFETY
Voltage: 120 V
Frequency: 60 HZ
Intensity (Amp.): 15 Amps
NOTE: If the plug does not fit in the
outlet, contact a qualified electrician.
Do not modify the plug in any way.
Do not use an adapter.
Do not use an extension cord. If the
power supply cord is too short, have
a qualified electrician or serviceman
install an outlet near the appliance.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ksb60604ksb60 series

Table of Contents