Advertisement
Functions
OPERATING YOUR BREVILLE
PRODUCT
Before first use, remove and safely discard any
packing material, promotional labels and tape
from the pancake maker.
WARNING
Fully unwind power cord from cord storage
facility before use.
BEFORE FIRST USE
Check that cooking plates are clean and free
of dust. Wipe over with a damp cloth. Place the
pancake maker on a flat, level surface with the
lid in the closed position.
Ensure there is a minimum distance of 20cm of
space on all sides of the pancake maker. Ensure
there are no items on top of the pancake maker.
1. Insert power plug into a 230/240V power
outlet and turn the power on. The unit will
be in standby mode and the screen will
display 2 dashes.
2. Press the
button to start pre-heating.
The 'POWER' light will illuminate red and
the screen will show a rotating loop '
whilst pre-heating.
3. Once the pancake maker has finished
pre-heating, the 'POWER' light will remain
lit and the 'READY' light will illuminate
green, the unit will beep 3 times to alert
that the pre-heat has finished and '
continuously flash on the screen.
NOTE
If you don't attend to the unit within 30 seconds
after the initial pre-heat, the unit will continue
pre-heating for an additional 20 minutes with
the screen continuing to show the rotating
loop. The 'Power' light will remain on and the
'READY' light will cycle on and off.
8
If after 20 minutes you still have not attended
to the unit to set your cooking time, the unit
will go into auto off, the unit will sound 5
beeps, stop heating and 2 dashes '– –' will
be displayed on the screen and both the
'POWER' and 'READY' lights will no longer be
illuminated indicating heating has stopped.
4. Open the lid and pour/place your batter/
ingredients evenly into the centre of each
well. The total volume of batter/ingredients
should not exceed the rim of the bottom
cooking well.
NOTE
Do not overfill the cooking wells. 1/3 cup is
the maximum amount of pancake batter per
cooking well.
5. Set your required cooking time using the
timer increase
Select a time between 1 to 15 minutes.
6. Press
The time will stop flashing to indicate that
the timer is counting down.
7. During this time the 'POWER' light will
'
remain lit, while the 'READY' light will
illuminate green.
NOTE
The 'READY' light will continue to cycle
' will
on and off to indicate the pancake maker is
maintaining the correct temperature.
decrease
button to commence cooking.
buttons.
Hide quick links:
Advertisement
