Cisco 88 Series User Manual

Cisco 88XX IP Telephones User Guide
BUTTONS AND HARDWARE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Handset light strip
Phone screen
Programmable
feature buttons
Softkeys
Navigation Bar
Select button
Release Button
Hold/Resume
button
Conference
Transfer
Speakerphone
Mute
Headset
Key Pad
Volume control bar
Contacts
Applications
Messages
Back Button
Handset
1
DIALING INSTRUCTIONS
INTERNAL CALLING WITHIN YOUR SITE
Dial the 4 digit extension number
CALLING TO ANOTHER COMPANY LOCATION
Dial the 8 + phone number
PLACING A CALL OUTSIDE THE SYSTEM
Local: Dial 8 + the Area Code + Number
Long Distance: Dial 8 +1 + Area Code + Number
International: Dial 8 + 011 + Number
Emergency: Dial 8 + 911 or 911
BASIC FEATURES
PLACING A CALL
1. Enter a number using the key pad
2. Go off-hook using one of the follow actions:
Lift the handset
Press the Call softkey
Press the Handset button
Press the Speakerphone button
ANSWERING A CALL
There are 5 options for answering a call:
Lift the Handset
Press the Answer softkey
Press the flashing amber session button (next to
the line keys, right side of screen)
Press the (unlit) Headset
Press the Speaker button
ENDING A CALL
There are three options for ending a call:
Hang up the Handset. OR
Press the EndCall softkey. OR
Press the lit Headset or Speaker button.
MUTE
Press the Mute button. When Mute is on, the Mute
1.
button is lit red.
To disengage mute, press Mute again.
2.
Note: If you are using mute along with the speakerphone,
lifting the handset will disengage mute.