Controlling The Monitor With A Pc; Pc Connection - Sharp PN-455RU Operation Manual

Controlling the Monitor with a PC

You can control this monitor from a PC via RS-C (COM port) on the PC. You can also connect
multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page
38), you can make input mode selection/adjustment or can check the status of a specific monitor.

PC connection

One-to-one connection with a PC...... Basic operation
Connect with RS-232C straight cable between the PC's COM port (RS-232C connector) and the
RS-C input terminal on the rear of the monitor.
RS-232C straight cable (commercially available)
RS-232C
input terminal
To COM port
▼ PC
5
E