Setting The Reception Mode - Sharp UX-355L Operation Manual

Setting the Reception Mode

Setting the Reception Mode
Your fax has three modes for receiving incoming calls and faxes:
TEL mode:
Select this mode when you want to receive both phone calls and faxes
on the line connected to the fax machine. All calls, including faxes,
must be answered by picking up the fax machine's handset or an
extension phone connected to the same line.
FAX mode:
Select this mode when you only want to receive faxes on your line.
The fax machine will automatically answer all calls on four rings and
receive incoming faxes.
A.M. mode:
Use this mode only if you have connected an answering machine to
the fax (see Chapter 7). Select this mode when you go out to receive
voice messages in your answering machine and faxes on your fax
machine.
Setting the reception mode
Press the RECEPTION MODE key until the arrow in the display
points to the desired mode.
RECEPTION MODE key
1
2 3
4 5 6
7 8 9
0
For more information on receiving faxes in TEL and FAX modes, see
Chapter 4, Receiving Documents (page 72). For more information on
using A.M. mode, see Chapter 7, Answering Machine Hookup (page
88).
32
RECEPTION
MODE
FAX
TEL
JUN 01 10:30
A.M.
TEL FAX
JUN 01 10:30
A.M.
TEL FAX
JUN 01 10:30
A.M.