Introduction - Sharp UX-355L Operation Manual

Introduction

Automatic dialing
Imaging film
Memory size*
Modem speed
Transmission time*
Resolution
Automatic document
feeder
Recording system
*Based on ITU-T Test Chart #1 at standard resolution, excluding time for proto-
col signals (i.e., ITU-T phase C time only).
Welcome, and thank you for
choosing a Sharp facsimile
machine! The features and
specifications of your new
Sharp fax are shown below.
Rapid Key Dialing: 7 numbers
Speed Dialing: 40 numbers
Initial starter roll (included with machine):
32 ft. (10 m) (approx. 30 letter-size pages)
Replacement roll:
UX-3CR 98 ft. (30 m) (two rolls in
package, one roll yields approx. 100
letter-size pages)
476 KB (approx. 27 average pages with ECM
turned off)
14,400 bps with automatic fallback to lower
speeds.
Approx. 6 seconds (only when ECM is on)
Horizontal: 203 pels/inch (8 pels/mm)
Vertical:
Standard: 98 lines/inch (3.85 lines/mm)
Fine /Halftone:
196 lines/inch (7.7 lines/mm)
Super fine:
391 lines/inch (15.4 lines/mm)
10 pages max. (20 lb paper)
Thermal transfer recording
1