Setting The Date And Time - Sharp UX-355L Operation Manual

Setting the Date and Time

The date and time
appear in the display and
are printed at the top of
every page you fax.
Set the date and time by pressing the keys on the operation panel as
shown below.
Do not set the date and time if you are using OpenLCR!
OpenLCR automatically sets the date and time each time your fax calls
OpenLCR and receives rate data. To ensure accurate use of the rate data, do
not change the date and time setting yourself. OpenLCR also sets the date
and time for you if you perform the fax transmission test (see page 40).
1
4
7
* key
Note: The imaging film and printing paper must be loaded before the date
and time can be set.
1
Press these keys:
The display will show:
ENTRY MODE
3 key
2 3
5 6
8 9
0
Setting the Date and Time
FUNCTION key
START/MEMORY
key
STOP key
FUNCTION
3
29