Table Of Contents - Honeywell R7140G Installation Instructions Manual

Table Of Contents

Specifications2
Installation5
Mounting Wiring Subbase6
Wiring Subbase6
Final Wiring Check7
Mounting R7140 Relay Module8
Safety Shutdown22
Safety Shutdown (Lockout) Occurs If Any Of The Following Occur During The Indicated Period22
Sequence Of Operation22
Run/Test Switch23
Settings And Adjustments24
Selectable Site-Configurable Jumpers24
Static Checkout25
Equipment Recommended25
General Instructions25
System Checkout27
Flame Signal Measurement28
Initial Lightoff Checks28
Proved Pilot Systems28
Direct Spark Ignition Systems29
Pilot Turndown Test (All Installations Using A Pilot)29
To Eliminate Ignition Interference30
Hot Refractory Saturation Test (All Infrared Detectors)30
Hot Refractory Hold-In Test (Rectifying Photocell, Infrared Detectors, Ultraviolet Detectors)31
Ignition Spark Response Test31
Flame Signal With Hot Combustion Chamber (All Installations)31