Setting Up The Organizer After Initialization; Setting The Owner's Information - Sharp OZ-5600 Operation Manual

3. Enter your telephone number, then press
The cursor moves to the ADDRESS field.
4. Enter your full address.
Press to move the start of the next line in
ADDRESS.
5. Press when done.
ENTER
A message appears confirming the Owner Information has
now been set.
Press to proceed with setting up the Clock as
ENTER
described below (or CANCEL
procedure).
Setting the Clock
In order for the Calendar, Schedule, To Do, and other
time-based applications to work correctly, the built-in clock
must be set to the correct time, date and city. The Clock
application displays the time in two different cities: the
Local city, where the user normally lives or works, and the
World city, which is any other city of the user's choice.
When the Organizer is first initialized, the Local city is
automatically set to New York, and the World city is
London. Before setting the Clock's correct time, you should
first select the Local City for which you want to set the time.
After entering the Owner Information above, the following
list of cities appears:
46
NEXT .
to quit the User Setup
#1-8 Display
6. If the desired city does not appear, press
NEXT to display more cities.
You can jump to a particular country by pressing the
first letter of that country's name.
7.
Select the desired city by moving the cursor to it.
If your city does not appear in the list, press
to display the User Cities list, then select USER
CITY2. You can change the name to your city later,
using the Clock application menu.
8. Press .
ENTER
The Daylight Saving Time screen appears.
9. If your city is currently on Daylight Saving Time, press
Y , otherwise press
The ADJUST TIME/DATE window then appears.
10.
Enter the local time, preceding single-digit hours and
minutes with "0".
11. Press PM to select PM or
.
NEXT
12. Select the time system you want the Clock to use,
then press .
NEXT
or
PREV
SPACE
N
.
AM for AM, then press