Copying Or Moving Entries - Sharp OZ-5600 Operation Manual

5. Press ENTER if you want to store the original entry
with any changes you have made (including moving
or copying the selected text), or press
discard all the changes you have made to the original
entry. Note that even if you press
you selected will remain in the clipboard for you to
use.
6.
Move the cursor to the location where you want to
place the text, either within the same entry or in
another entry.
7. Press 2nd
PASTE
The text you selected is now pasted into the new location.
8. Press ENTER to store the amended entry with the
pasted text.
+
Pasted text is inserted into existing text regardless
of whether the insertion or overwriting mode is
selected. However, by highlighting some text
before pressing
with the pasted text. Thus you can easily replace
one block of text with another by highlighting it
before pasting.
Pasted calculations can be performed in the Calc
application. However, only numbers and operators
can be pasted in the Calc application. Any text that
is pasted will be ignored.
162
CANCEL
CANCEL , the text
.
2nd
PASTE , it can be replaced

Copying or Moving Entries

to
The CUT/COPY/PASTE operations provide a quick,
convenient way for you to copy or move an entire entry to
another location. Entries do not have to be in the same file
or even in the same application, since CUT/COPY/PASTE
work across virtually all applications.
1. Select an entry that you want to copy or move in
Index mode.
2. Press 2nd
message will ask if you are sure you want to delete
the entry from its present location. Press
proceed (or
Press 2nd COPY
3. Press
NEW
copy the entry to. You can also append the copied/cut
entry to an existing entry. Open an entry in Edit mode,
and move the cursor to the position where you want
to append the entry.
4. Press 2nd
5. Make any necessary changes to the moved/copied
entry. Press
have finished.
The entry you selected is now moved or copied to the new
location.
CUT if you want to move the entry. A
to cancel the operation).
N
if you want to make a copy of the entry.
in the application you want to move or
.
PASTE
ENTER to store the entry when you
Y to