Special Modes Screen For Scan To Hdd - Sharp MX-C311 Operation Manual

Special modes screen for Scan to HDD

When the [Special Modes] key is touched, the following screen appears. For more information on each setting, see
"SPECIAL MODES" (page 5-65) in "5. SCANNER / INTERNET FAX".
Special Modes
(1) [Erase] key
The erase function is used to erase shadow lines on
images produced when scanning thick originals or books
on the document glass.
(2) [Card Shot] key
This function lets you store the front and reverse sides of
a card as a single file.
(1) (2)
Scan to HDD/Special Modes
Erase Card Shot
Slow Scan
Mode
(4)
(3) [Job Build] key
This function lets you separate a many-page original into
sets, scan each set using the automatic document
feeder, and store all pages as a single file. Use this
function when there are more original pages than can be
placed at once in the auto document feeder.
(4) [Slow Scan Mode] key
Use this function when you wish to scan thin originals
using the automatic document feeder. This function helps
prevent thin originals from misfeeding.
6-21
DOCUMENT FILING
(3)
OK
Job
Build
Contents