Sharp MX-C311 Operation Manual page 247

Original
5½x8½ 8½x14
8½x11 8½x13
3
8½x13
Size Input
When placing an AB size or non-standard size original, specify the original size as explained in
(page 2-29).
Color Mode
Full Color
Exposure
Auto
4
Copy Ratio Original
100%
8½x11
For some original size settings, the same size of paper as the original may not be automatically selected. In this case,
manually change the paper size.
5
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key (
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Even if a color mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key is
6
pressed.
To cancel scanning of the original and copying...
Press the [STOP] key (
(1) (2)
OK
AB
2
5
Inch
Custom Size None
Special Modes
2-Sided Copy
Plain
8½x11
Output
1. 8½x11
5½x8½
2.
File
8½x14
3.
8½x11
4.
Quick File
Paper Select
Auto
8½x11
Plain
Special Modes
2-Sided Copy
Plain
8½ 11
) and then enter the correct number.
).
Specify the original size.
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
Check the paper to be used and the
color mode.
Make sure that the desired paper (tray) and color mode are
selected.
• To change the paper (tray), touch the [Paper Select] key.
☞
PAPER TRAYS
• To change the color mode, touch the [Color Mode] key.
☞
COLOR COPY MODES
Set the number of copies (number of
7
sets) with the numeric keys.
2-11
COPIER
"ORIGINAL
(page 2-9)
(page 2-21)
Contents
SIZES"