When The Machine Will Be Connected With A Usb Cable - Sharp MX-C311 Operation Manual

INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
WHEN THE MACHINE WILL BE
CONNECTED WITH A USB CABLE
Supported operating systems: Windows 98/Me/2000
* *
2003 /Vista /Server 2008
* Administrator's rights are required to install the software.
• Make sure that a USB cable is not connected to your computer and the
machine.
If a cable is connected, a Plug and Play window will appear. If this happens,
click the [Cancel] button to close the window and disconnect the cable.
• To install the PPD driver when Windows 98/Me is used, see "USING THE
STANDARD WINDOWS PS PRINTER DRIVER (Windows 98/Me/NT 4.0)"
(page 33) and install the driver using the Add Printer Wizard.
• To use the port created when the printer driver is installed for fax data
transfer, install the printer driver first and then install the PC-Fax driver.
When the software selection screen appears in step 6 of "OPENING THE
SOFTWARE SELECTION SCREEN (FOR ALL SOFTWARE)" (page 8),
perform the steps below.
1
Click the [Printer Driver] button.
22
*
* *
/XP /Server