Two-Sided Copies From Two-Sided Originals - Sharp AR-M208 Operation Manual

7
Place the second original face down on the platen glass and press the
START (
G
To stop a copy run during duplex copying, press the CLEAR (C) key.
G
To cancel the 2-sided copy mode, press the 2-SIDED COPY key, select the one-sided to
one-sided mode, and press the OK key.
G
If an uneven number of originals are being copied, press the READ-END key after the
last original is scanned. The last copy will be output single-sided.

Two-sided copies from two-sided originals

(Only when a RSPF is being used.)
G
Paper sizes that can be used in the 2-sided copy mode are 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13",
8-1/2" x 14", 11" x 17", A5, B5, B5R, A4, A4R, B4, and A3.
1 Ensure that no original is left on the platen glass. Adjust the original
guides to the size of the originals and set the originals face up in the
document feeder tray.
G
5-1/2" x 8-1/2" size originals cannot be used.
2 Press the 2-SIDED COPY key.
G
The 2-sided copy mode selection screen will appear.
) key again.
TWO-SIDED COPYING
COPY MODE
1 to 1
1 to 2
1 2
2 to 2
2 2
2
31