Sharp AR-M208 Operation Manual page 29

3
Set the originals face up in the document feeder tray.
G
The original size will be indicated in the display, and the paper tray with the
corresponding paper size will be automatically selected.
#KEY OPERATOR The auto paper select function can be disabled using a key operator
program. If this function has been disabled, use the PAPER SELECT key to select the
desired paper tray. See page 15 of the KEY OPERATOR'S GUIDE.
G
To copy onto a different size paper, use the PAPER SELECT key to make the selection.
4 Ensure that the one-sided to one-sided copying mode is selected.
G
When no icon indicating a 2-sided copy mode is displayed, the one-sided to one-sided
copying mode is selected.
5
Set the number of copies and press the START (
G
Press the CLEAR (C) key to stop copying in the middle of a run.
Ready to copy.
1
8 11
2 /
AUTO
100%
100%
1
8 11
2 / AUTO
COPYING FROM THE RSPF
) key.
2
27