Sharp AR-M208 Operation Manual page 23

2
When copying is completed, press the AUDIT CLEAR key.
NOTE:
If an unassigned number is entered, "Enter your account number." will appear again in the
display, indicating that the number was not accepted.
When the key operator program for account number security has been set and unassigned
numbers are entered three successive times, the copier will not accept another number for one
minute, and the following message will appear.
#KEY OPERATOR
See page 19 of the KEY OPERATOR'S GUIDE for account number
security.
Please see your
key operator for
assistance.
AUDITING ACCOUNTS
21
1