Program Alarm; System Alarm - Honeywell DC1000 SERIES Product Manual

3.4.2.3 Absolute Lower Limit Alarm (Alarm Code 06, Alarm release in the first alarming situation)
3.4.2.4 Absolute Lower Limit Alarm (Alarm Code 16, No alarm release in the first alarming situation)
3.4.3

Program Alarm

3.4.3.1 Segment End Alarm (Alarm Code 07)
Once the selected segment is completed, the alarm becomes actuated
- ALD1 – ALD3
- AL1 – AL3
- ALT1 – ALT3
3.4.3.2 Program RUN Alarm (Alarm Code 17)
While a program runs, the alarm becomes actuated
3.4.4

System Alarm

3.4.4.1 System Error Alarm (Alarm Code 08)
3.4.4.2 System Error Alarm (Alarm Code 18)
3.4.4.3 Timer Alarm (Alarm Code 19)
Once the PV reaches to the SP, the alarm becomes actuated after a certain time delay.
(Range: 00 hour 00 min – 99 hour 59 min)
Set the Alarm Code 07
Enter Segment No. for alarms
Define the alarm timing
(0 Flickering, 99.59
DC1010/1020/1030/1040 Product Manual
Continuant, Others
19
Time Delay)