Stitch Density On One Side - Kenmore 385.1915 Owner's Manual

[ _ SIEP2
[
sTEp }
e Stitch Density on One Side
(_) Press the memory button.
The machine will bartack and sew
down the right side.
Stop the machine when you are
directly opposite the first stitch
on the left hand side.
(_) Press the memory button,
The machine will autoqock the end
of the buttonhole and stop. Keep
the foot control depressed until
the machine stops by rtself.
For Condition A:
Left Side Stitches too Far Apart
(see above).
Turn the feed balance dial slightly
toward "+" Use the large screw
driver in your accessory box,
For Condition B:
Ri{Jht Side Stitches too Far Apart
(see above). !
Turn the feed balance dial slightly
toward "° '°
After adjusting the feed balance dial, sew another test buttonhole to be sure
your adjustment _scorrect.
NOTE: Remember to return the feed balance dial to the standard mark ( _ )
when you have completed the buttonholes,
70