Seam Guides, Presser Foot Lever, Feed Dog Control - Kenmore 1340 Owner's Manual

IIII IIIIII I I III III II
SEAM GUIDES
Seam guides are printed on needle plate, at
both sides of needle, to help you line up the
fabric and keep it straight. The standard
seam width is 5/8". So these lines are
emphasized, easy to follow.
Also the cross lines are "cornering guides" to
help when turning a square corner 5/8" from
the fabric edge. (For details on cornering, see
page 25.)
_ornering Guide
Cornering Guide
PRESSER FOOT LEVER
Presser foot lever has a two position lift,
tn order to place heavy fabric under the
presser foot or to change the presser foot
raise the presser foot lever to its maximum
upward position as shown.
\
FEED DOG CONTROL (Model1358)
The feed dog control is located on the right
front of the machine bedplate, There are a
few times when you want to control the
feeding of the fabric yourself. When the
control is turned to the left, the feed dogs
drop and do not move the fabric.
For most of your sewing, turn knob to the
right.
m
15