Panasonic KX-TR320F Operating Instructions Manual page 5

2
Before You Talk
The unit has 14 operating frequency channels and 38 group codes.
To talk to others, all users in your group must be using the same
channel and group code.
2-A Selecting the Operating Channel
1 Press
(MENU)
.
≥"
" and the current channel will flash
on the display.
2 Press
(›) (‹)
or repeatedly until the
desired operating channel (1–14) is
displayed.
3 Press
(TALK)
or wait for 10 seconds.
≥The unit will return to the standby mode.
≥ The selected channel will not be cleared even when you turn off
the unit.
2-B Selecting the Group Code (CTCSS)
The Continuous Tone Coded Squelch System (CTCSS) allows you
to ignore (not hear) unwanted calls from other persons who are
using the same channel. It provides communication with silent
standby since you will only receive calls from group members using
the same group code. The unit is equipped with 38 group codes. The
factory preset is "1".
The CTCSS does not make your conversation private. It only
allows you to not to listen to unwanted conversations.
1 Press
(MENU)
twice.
≥"
" and the current group code will
flash on the display.
2 Press
(›) (‹)
or repeatedly until the
desired group code (0–38) is displayed
(see below).
3 Press
(TALK)
or wait for 10 seconds.
≥The unit will return to the standby mode.
≥ The selected code will not be cleared even when you turn off the
unit.
≥ To communicate with others without a group code, select "0" (OFF)
in step 2.
CTCSS code
No. Freq. No. Freq.
1 67.0 11 97.4
2 71.9 12 100.0
3 74.4 13 103.5
4 77.0 14 107.2
5 79.7 15 110.9
6 82.5 16 114.8
7 85.4 17 118.8
8 88.5 18 123.0
9 91.5 19 127.3
10 94.8 20 131.8
–5–
Section 2
(unit: Hz)
No. Freq. No. Freq.
21 136.5 31 192.8
22 141.3 32 203.5
23 146.2 33 210.7
24 151.4 34 218.1
25 156.7 35 225.7
26 162.2 36 233.6
27 167.9 37 241.8
28 173.8 38 250.3
29 179.9 0 OFF
30 186.2