Changing Or Reapplying The Default Copp Policy Using The Setup Utility - Cisco Nexus 3600 NX-OS Security Configuration Manual

Configuring Control Plane Policing
class copp-system-p-class-critical
police cir 19000 pps bc 128 packets conform transmit violate drop
class copp-system-p-class-important
police cir 500 pps bc 128 packets conform transmit violate drop
class copp-system-p-class-normal
police cir 300 pps bc 32 packets conform transmit violate drop
class class-default
police cir 50 pps bc 32 packets conform transmit violate drop
control-plane
service-policy input copp-system-p-policy
Create CoPP class and associate ACL:
class-map type control-plane copp-arp-class
match access-group name copp-arp-acl
Add the class to the CoPP policy:
policy-map type control-plane copp-system-policy
class copp-arp-class
police pps 500

Changing or Reapplying the Default CoPP Policy Using the Setup Utility

The following example shows how to change or reapply the default CoPP policy using the setup utility.
switch# setup
This setup utility will guide you through the basic configuration of
the system. Setup configures only enough connectivity for management
of the system.
*Note: setup is mainly used for configuring the system initially,
when no configuration is present. So setup always assumes system
defaults and not the current system configuration values.
Press Enter at anytime to skip a dialog. Use ctrl-c at anytime
to skip the remaining dialogs.
Would you like to enter the basic configuration dialog (yes/no): yes
Do you want to enforce secure password standard (yes/no)[y]: <CR>
Create another login account (yes/no) [n]: n
Configure read-only SNMP community string (yes/no) [n]: n
Configure read-write SNMP community string (yes/no) [n]: n
Enter the switch name : <CR>
Enable license grace period? (yes/no) [n]: n
Continue with Out-of-band (mgmt0) management configuration? (yes/no) [y]: n
Configure the default gateway? (yes/no) [y]: n
Configure advanced IP options? (yes/no) [n]: <CR>
Enable the telnet service? (yes/no) [n]: y
---- Basic System Configuration Dialog ----
Changing or Reapplying the Default CoPP Policy Using the Setup Utility
Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 7.x
139