Installation And Uninstallation; Installation Of Fr Configurator - Mitsubishi FR-A700 Series Instruction Manual

1.3

Installation and Uninstallation

1.3.1

Installation of FR Configurator

To use the Configurator (FR-SW3-SETUP-WE), the files included on the setup disk (CD-ROM) or downloaded file must be
installed onto the personal computer.
Check following items before the installation.
· Close any other applications that have already been started.
· For the installation, log on as an administrator (Administrator account) and start installation.
· If an inverter is connected by the USB cable, disconnect the USB cable.
· If the following window is displayed during the installation, click
· Installation files are compressed. FR Configurator does not function with just copying the installation files. Please install the
software with using the installation program.
· To install the software, follow the installation procedure in Windows screen.
· If VFD Setup Software (FR-SW1-SETUP-WE) of an older version (CD-ROM) is installed after the installation of FR
Configurator, FR Configurator does not function. In this case, please uninstall FR Configurator (Refer to page 8), and then
install FR Configurator again.
· If the older version of FR Configurator has been installed, the older version will be uninstalled during the installation.
Installation procedure
The following describes the procedures of installing FR Configurator.
(1) Insert the CD-ROM to an available CD-ROM drive. Installation starts automatically.
REMARKS
Installation can be started with double-clicking the icon of CD-ROM drive or the following procedure.
1) Choose the [Run...] command from [Start] menu.
2) "Run" window appears.
3)Type "D:\SETUP" (with one-byte characters) in "Open" field and click
(2) The window shown on the right is displayed. Click
.

Installation and Uninstallation

to continue the installation.
. (When CD-ROM drive is D drive)
1
5